When you encounter this issue, you’ll receive the following full error message;
This event is the result of resetting the BIOS to defaults. This is being triggered by inadvertently holding down the power button for at least 25 seconds. It can also be triggered when you place the system in a bag or a charging card in a position where the power button may be engaged for a long period. Note: If you have BitLocker enabled on the system, the Trusted Platform Module (TPM) will be reset causing BitLocker to prompt for the recovery key.
Invalid Configuration Information – Windows 11/10 boot error
If you’re faced with this Invalid Configuration Information error, you can try our recommended solutions in the order presented below and see if that helps to resolve the issue. Let’s take a look at the description of the process involved concerning each of the listed solutions.
1] Reset your custom BIOS options
If the system has been imaged with the BIOS set in the Legacy Mode, this BIOS reset will place the system in a no-boot configuration as the default BIOS setting is UEFI. If you had been operating in the Legacy mode, you will need to press F2 to enter the BIOS and change the boot order back to legacy, then reboot the system. You will also need to press F1 to boot (due to the time and date are not set) then Windows should update the time and date automatically. This solution requires you to follow the guide instructions on the screen to press the F2 Key, (if attached to a keyboard) or the Volume Down button to enter the BIOS menu. Once in the BIOS reset your custom BIOS options, then verify the date & time are correct & change any other needed BIOS menu options for your normal configuration and then restart the system. If this fails to resolve the Invalid Configuration Information – Windows 10 boot error, continue with the next solution. Read: Boot Configuration Data is missing or contains errors.
2] Replace the CMOS battery
This solution requires you to change the CMOS battery on your Windows 10 computer and see if that resolves the Invalid Configuration Information – Windows 10 boot error. You may require the services of a hardware technician for this. Hope this helps!
